Quick answer: Start with the exact camera model, active recording mode, detection settings and storage status. There is no single fix or app menu that applies to every eufy camera. Check whether footage is missing, playback is unavailable, or notifications have stopped; those are different problems.
Updated October 8, 2026. Research-based troubleshooting using the manufacturer sources below; we have not tested these fixes or measured their success rate.
Confirm video recording is enabled for the mode currently in use. For eufyCam E40, eufy directs users to the app's Smart tab, then Home/Away mode settings, to enable Video Recording and Notification. Menus and supported modes vary by model and app version. Follow your model's instructions rather than assuming these steps fit every camera.
Confirm the camera and motion detection are enabled. Review any activity zones or schedules you have configured. A live picture does not establish that an event will be recorded. Change one setting at a time and check whether a new clip appears.
Use the model's documented detection range and mounting guidance. Eufy's E40 troubleshooting specifies movement inside the camera's view and within 8 meters (26 feet), and provides a motion-sensitivity adjustment. That is E40 guidance, not a universal distance for all eufy cameras.
Identify where your particular model saves recordings: built-in storage, a compatible microSD card, HomeBase, or a supported cloud service. For example, Indoor Cam S350 has no internal recording storage; its FAQ describes microSD, HomeBase 3 and cloud options. A working live view does not prove saved clips are available.
Do not format storage simply because it is full. Check the model's overwrite behavior and any storage error first. Eufy's Outdoor Cam documentation describes overwriting older footage when its card fills. Export footage you need before any formatting, reset or removal procedure that could erase recordings or access. If export is unavailable and the footage matters, contact support before proceeding.
Eufy's E40 troubleshooting says not to mount that camera behind glass. Follow the placement instructions for your exact model. Do not assume that a clear live picture through a window proves reliable motion detection.
An offline app status does not prove every camera stopped recording. Eufy says its wired Outdoor Cam can continue saving to microSD during a Wi-Fi outage while power remains available, although app viewing needs Wi-Fi. This is model-specific: do not extend that behavior to another camera or a wireless camera-to-hub connection.
Check the camera, power, router and any required HomeBase connection using the model's support instructions. Once access returns, check for an actual saved clip instead of assuming either recording success or failure.
If the documented checks do not resolve the problem, contact eufy support with the model, firmware, storage setup, error message and steps already tried. Do not publish account credentials or private footage. Remove, re-add or factory-reset a device only when the applicable instructions call for it and you understand what settings or footage may be lost.
Ask support about repair, warranty and the unresolved symptom first. If you decide to replace it, write down the requirement the current setup is not meeting: reliable placement, a particular recording mode, storage or access. We have not established that a different model will solve your installation's problem.
Our buying guide separates storage, power and paid extras so you can compare the whole setup before buying.
Compare no-subscription camera setups
Need sensors or professional monitoring as well? Read the security-system replacement guide.
Sources reviewed October 8, 2026. Model examples are not interchangeable. SecurityCompassHQ may earn commissions from qualifying purchases through links in its buying guides; that does not establish a troubleshooting outcome.